Tips & Tricks | Kinesense
scroll

Tips & Tricks

/Tips & Tricks
­

Kinesense tips & tricks #43 – Milestone import

Taking a break from our epic journey through clarification this week to take a look at the importation of Milestone videos. Milestone is a VMS solution that can be accessed directly from Kinesense using our Milestone plug-in. VMS, or video management systems, collect videos from cameras or other sources, stores that video and provides an interface […]

By |December 7th, 2018|Tips & Tricks|Comments Off on Kinesense tips & tricks #43 – Milestone import

Kinesense tips & tricks #42 – Clarification: Deblur and superresolution

Having moved into the advanced section last week with histogram edits, The Clarification Chronicles continues this week by looking at the deblur and superresolution options.
Deblur  

DeBlur uses a ‘Fast Fourier Transform’ to reverse certain types of image blur. The key to ‘deblur’ is modelling how the blur happened – did the camera move, and how much and […]

By |November 30th, 2018|Tips & Tricks|Comments Off on Kinesense tips & tricks #42 – Clarification: Deblur and superresolution

Kinesense tips & tricks #41 – Clarification: Histogram

Kinesense: The Clarification Chronicles continues with Histograms this week. A histogram is a graphical representation of the tonal distribution in an image. In Kinesense there are three different options that can be accessed from the histogram clarification 
Histogram Edit
Histogram Edit allows the manual tuning of the image transform. It can be used to bring out specific […]

By |November 23rd, 2018|Tips & Tricks|Comments Off on Kinesense tips & tricks #41 – Clarification: Histogram

Kinesense tips and tricks #40 – Clarification: Invert, gamma correction and split channel

This week on Kinesense: The Clarification Chronicles, we’re going to look at inverting an image, gamma correction and splitting channels.
Invert 
Inverting an image simply displays the negative of said image. There are no options for this.
Gamma Correction 
Gamma correction is a non-linear method of adjusting the brightness and contrast of an image to make certain user or […]

By |November 16th, 2018|Tips & Tricks|Comments Off on Kinesense tips and tricks #40 – Clarification: Invert, gamma correction and split channel

Kinesense tips and ticks #39 – Clarification: Noise reduction and sharpness

Clarifications again this week. Previously we looked at cropping clarifications and rotating and scaling. Today it is Noise reduction and Sharpness

When you want to remove noise from your licence plate or sharpen up an image of a suspect looking bunny, Kinesense has the tools for you!
Noise Removal 
When your image or video contains a lot of […]

By |November 9th, 2018|Tips & Tricks|Comments Off on Kinesense tips and ticks #39 – Clarification: Noise reduction and sharpness

Kinesense tips and tricks #38 – Clarification: Brightness and contrast

More clarifications again this week. We’ve previously covered rotating, scaling and cropping so this time we’re going to move on to the brightness and contrast options found in the Simple section.
Brightness and Contrast 

Brightness and contrast is a staple for most image editing software. Brightness increased either the lightness or darkness of the whole image. Increasing the contrast makes the […]

By |November 2nd, 2018|Tips & Tricks, Uncategorized|Comments Off on Kinesense tips and tricks #38 – Clarification: Brightness and contrast

Kinesense tips and tricks #37 – Clarification: Rotating and scaling

Continuing on from last time when we looked at cropping clarifications, today we are looking at rotating and scaling.
Rotate Image (free) 

If you find that the camera is angled at an awkward angle and you want to move it but not by the typical 90 or 180 degrees then you can use the rotate image (free). Here […]

By |October 26th, 2018|Tips & Tricks|Comments Off on Kinesense tips and tricks #37 – Clarification: Rotating and scaling

Kinesense tips and tricks #36 – Clarification: Cropping

Clarifications, part of the Report tab, are tools that can help you clear up an image or video. Today we’re going to cover  the two different types of cropping found in the geometry tools.

Cropping  
If you want to just export a section of an image or video you can do this by cropping the image. Click […]

By |October 12th, 2018|Tips & Tricks|Comments Off on Kinesense tips and tricks #36 – Clarification: Cropping

Kinesense tips and tricks #35 – Vemotion import

Getting back to our regular tips this week, we’re taking a look at Vemotion imports. Vemotion is a brand of video recorder. Kinesense has a special option in the Video Import Wizard to allow easy import of multiple channels of video from the Vemotion. Vemotion recorders save video in folders representing 1 hour of video. The […]

By |October 5th, 2018|Tips & Tricks|Comments Off on Kinesense tips and tricks #35 – Vemotion import

Sneak Peak – Kinesense LE 3.2: New Algorithms

In last week’s ‘sneak peak’ at the new features in Kinesense version 3.2, we covered the new options for Multiple Video Exports, Undo Annotations and the FFMpeg update. This week we’ll be looking at the new algorithm options for processing video and how to view them.
Deep Learning
Deep learning is a very useful new tool in […]

By |October 1st, 2018|Tips & Tricks|Comments Off on Sneak Peak – Kinesense LE 3.2: New Algorithms